Author |
Message |
|
Post subject: Vyriesene Zaujimavy problem s simple queue
Posted: 24.09.2012 - 22:32 #100473
|
|
Ucen
Joined: Júl 15, 2011
Posts: 769
|
|
Zdravim vo spolok
Poslednu dobu riesim zaujimavy problem so simple queue.
takze router 192.168.1.1 bridge
Loc vys 192.168.1.2
pripojeny klient jeden 192.168.1.3
pripojeny dalsi tiez na loco 192.168.1.4 za ktorym je dalsi bod kde su ludia siete 192.168.2.0/24
Ma nastavenu rychlost pre ip 192.168.1.3
a potom mam este pravidlo ktory obmedzuje celkovy rozsah 192.168.1.0/24
a 192.168.2.0/24 a samozrejme pravidlo s ip 192.168.1.3 ma parent celkove pravidlo kde su cele rozsahy.
Zaujimave je na tom to ze mi zaratava ten celkovy rozsah len 192.168.1.3
Comu nerozumiem pretoze na inom sajte mi to nerobi ziadny problem aj ked tam nie je uplne totozna topologia ale princip simple je ten isty.
Na tom sajte je RB450.
Stretli ste sa uz niekto s tymto problemom? |
Last edited by pedro4444 on 30.09.2012 - 13:30; edited 1 time in total
|
|
|
|
 |
|
Post subject: RE: Vyriesene Zaujimavy problem s simple queue
Posted: 25.09.2012 - 08:44 #100478
|
|
Basic
Joined: Aug 30, 2011
Posts: 248
|
|
to by chcelo lepsie popisat, ako to mas nastavene. |
|
|
|
|
 |
|
Post subject: RE: Vyriesene Zaujimavy problem s simple queue
Posted: 25.09.2012 - 11:26 #100483
|
|
Majster
Joined: Júl 11, 2008
Posts: 2311
|
|
|
|
 |
|
Post subject: RE: Vyriesene Zaujimavy problem s simple queue
Posted: 25.09.2012 - 14:14 #100486
|
|
Majster

Joined: Feb 14, 2011
Posts: 2544
|
|
simple q u mikrotiku su cele popletene...ja mám na sajtoch parent queue a pod nimi dalsie podradené...občas sa stane ze parent queue prestane počítať niektorých klientov len tak.... hrozne daco. |
|
|
|
|
 |
|
Post subject: RE: Vyriesene Zaujimavy problem s simple queue
Posted: 25.09.2012 - 14:19 #100487
|
|
Ucen
Joined: Júl 15, 2011
Posts: 769
|
|
Flags: X - disabled, I - invalid, D - dynamic
5 name="Wi-Fi"
target-addresses=192.168.1.0/24,192.168.2.0/24,192.168.3.0/24
interface=all parent=none packet-marks="" direction=both priority=2
queue=default-small/default-small limit-at=0/0 max-limit=xxxx
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small
7 name="Wi-Fi 1" target-addresses=192.168.2.0/24,192.168.1.0/24
interface=all parent=Wi-Fi packet-marks="" direction=both priority=3
queue=default-small/default-small limit-at=0/0 max-limit=xxxx
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small
10 name="2" target-addresses=192.168.1.3/32 interface=all
parent=Wi-Fi 1 packet-marks="" direction=both priority=8
queue=default-small/default-small limit-at=0/0 max-limit=xxxx
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small
a jedna sa o to ze pravidlo Wi-FI1 rata len pravidlo 2 a nie este tie dalsie IP ktore cez ten MK prejdu.... |
|
|
|
|
 |
|
Post subject: RE: Vyriesene Zaujimavy problem s simple queue
Posted: 30.09.2012 - 13:29 #100555
|
|
Ucen
Joined: Júl 15, 2011
Posts: 769
|
|
prboelm vyrieseny hodit este dalsie pravidlo na rozsah a to pak pridat ku pod to hlavbne a uz vsetko rata ako ma.. ))) |
|
|
|
|
 |
|
Powered by PNphpBB2 © 2003-2005 The PNphpBB Group Credits |